Sweet and Simple Paper Castings


These little basket boxes would be a sweet addition on a Easter table setting.  Each is made using a die-cut box as the base.  What makes them become special are "extras" added to the surface, mainly the casted images.


Paper castings are so easy to make using any of the Arnold Grummer casting molds or any variety of molds that may be available.  Use this link to find a pamphlet that you can download filled with information about creating casting here.

After the paper castings are complete, the coloring can begin.  For the images on boxes I chose to use both chalks and Ranger Perfect Pearl powders.  The castings were trimmed of the paper around them to make them smaller and allow the papers used on the boxes to frame them.  One set was trimmed straight, the other with deckle designed decorative scissors.

Box Of Chicks
Die-cut the box from white mat board.  Form the box using redline tape.  NOTE: One side of the box is folded to the inside of the box to create an open box.  It is helpful to cut away the small flap before folding to the inside.  Some glue may need to be added to hold in place.  Apply dye based ink to the surface of the box.  Cut four squares, slightly smaller then the sides of the box.  Trim the edges if desired with decorative scissors.  Glue a length of ribbon around the center of the box.  Glue the Daisy casted squares at a diagonal onto two (or four sides) of the box. If using only two images, form two small bows from the ribbon and glue to the center of the two opposite sides and embellish with a button of choice.

Butterfly Basket
Die-cut the box from chipboard.  Form the box with redline tape.  NOTE: One side of the box is folded to the inside create an open box. Follow the same directions as above.  Apply paint to the surface of the box.  Cut papers to apply to the sides of the box.  NOTE: I used a small sheet of handmade paper from my stash of sheets using leftover scraps for interesting effects.  Glue the Butterfly squares onto the front and back of the box, centering them so background paper frames the image.  Create a handle from a stiff strip of paper.  Cover the handle by wrapping jute cord around the strip.  Glue onto the sides of the box, then add a button for embellishment.  Form a bow from desired ribbon, attach to the top, center of the handle.

These boxes show an Easter theme, but either design could be used for other occasions such as showers, weddings and birthdays or to fit any other holiday theme, buy changing colors, papers and casted images.

Other material information:
Beacon 3-in-1 Glue

Visit the Arnold Grummer website and when placing an order use code MAR20 for a 20% saving.

Next week I will be sharing another casted idea for Easter using a different type of mold for a cute little decoration.







Comments

  1. Replies
    1. Thanks Terri and such an easy project to get someone started with paper casting!

      Delete
  2. oh my goodness, just too cute!!!

    ReplyDelete
    Replies
    1. Thanks so much Sandee and thanks for sharing! Paper castings are so easy and fun to make.

      Delete
  3. Replies
    1. Yes Sharon, I agree! Could be used on an Easter table or buffet setting or just for guests to take home. Thanks for the comment!

      Delete

Post a Comment

Popular posts from this blog

How to create watermarks in your handmade paper

How to polish paper with a stone

Chigiri-e Japanese torn paper collage